Coffee Science_v.16, 2021

URI permanente para esta coleçãohttps://sbicafe.ufv.br/handle/123456789/12727

Navegar

Agora exibindo 1 - 20 de 50

MGS Aranãs: the new Arabica coffee cultivar developed by Epamig with wide adaptation
(Editora UFLA, 2021) Botelho, Cesar Elias; Abrahão, Juliana Costa de Rezende; Pereira, Antônio Alves; Oliveira, Antônio Carlos Baião de; Carvalho, Gladyston Rodrigues; Ferreira, André Dominghetti
This paper describes the MGS Aranãs cultivar (H32-11-17-4-2-MS-MS) resulting from a cross between the cultivars Icatu 3851-2 and Catimor. The MGS Aranãs cultivar is characterized by small size, ripe red fruits, large seeds, coffee leaf rust resistance, an architecture suitable for densification, production stability, and high beverage quality. This new cultivar is recommended for the Sul de Minas, Cerrado Mineiro and Vale do Jequitinhonha regions.
Interaction between climate, flowering and production of dry coffee (Coffea arabica L.) in Minas Gerais
(Editora UFLA, 2021) Soares, Lidiany dos Santos; Rezende, Tiago Teruel; Beijo, Luiz Alberto; Franco Júnior, Kleso Silva
Aiming to determine the interaction between climatic factors, flowering and yield of dry arabica coffee in municipalities in the regions of Southern Minas Gerais and Alto Paranaíba, both in the State of Minas Gerais, this study considered data from the harvest years 2008/2009 to 2017/2018, and climatic data analyzed according to the coffee phenological cycle. The determination of significant variables used the Stepwise method and the Akaike Information Criterion (AIC). The association of yield with climatic variables used a generalized linear model with gamma distribution and logarithmic function. Average flowering (20% to 50% of flowers per branch) used a logistic regression model. The productive variability of arabica coffee showed an association with the biennial cycle, the occurrence of medium and main flowering, flowering period and rains in bean formation. The occurrence of average flowering and the frequency of rainfall during bean formation enhanced coffee yield, at the same time as the increment in maximum temperature in vegetative bud formation reduced flowering and yield.
Classification of the maturity stage of coffee cherries using comparative feature and machine learning
(Editora UFLA, 2021) Velásquez, Sebastián; Franco, Arlet Patricia; Peña, Néstor; Bohórquez, Juan Carlos; Gutiérrez, Nelson
This work presents the use of multiple techniques (i.e., physicochemical and spectral) applied to harvested coffee cherries for the postharvest classification of the maturity stage. The moisture content (MC), total soluble solids (TSS), bulk density, fruits’ hardness, CIEL*a*b parameters and the dielectric spectroscopy methods were applied on coffee cherries at seven maturity stages. These maturity stages were assessed according to the days after flowering (DAF) and the physical appearance as traditionally performed by growers. An increase of the green-to-red ratio (i.e., a*) parameter was perceived, accompanied by a monotonic response for the hardness, TSS and bulk density with a maximum moisture content at stage 5. In the case of the dielectric spectroscopy technique, the loss parameter presented higher losses for unripe stages at the ionic conduction region. To compare the individual performance of each of the techniques, three machine learning methods were used: random forest (RF), support vector machine (SVM) and k-nearest neighbours (k-NN). The meta-parameters for these techniques were optimized for each case to achieve the best performance possible. Furthermore, as the dielectric response is of spectral nature, recursive feature selection was applied and the 500 MHz to 1.3 GHz frequency range selected for the task. The highest performance was obtained for the colorimetric (75.1%) and hardness (72.5%) responses, while the lowest was obtained for the moisture content (45.5%). The dielectric spectroscopy response presented a promising response (56.8%), that achieved a clear separation of unripe from ripe stages, except for stage 5 in which some of the samples were classified as stage 2. Most techniques studied are compatible with field conditions, and the dielectric technique shows potential to be transferred based on available software-radio defined platforms.
Decomposition and nutrients released from forest and perennial crops associated with organic coffee
(Editora UFLA, 2021) Araujo, João Batista Silva; Silva, Matheus Wandermurem da; Lima, Wallace Luís de; Pereira, Ana Claudia Hertel; Endringer, Denise Coutinho; Souza, Jacimar Luís de
Agroforestry consortia increase organic matter and nutrient cycling in agricultural systems. For this reason, the objective of this work was to study the release rate of nutrients and the decomposition of different organic residues, two times of the year, obtained from four cultures intercropped with conilon coffee, aiming to relate the released nutrients to the coffee needs. The decomposition of organic matter residues and the release of nutrients from Inga edulis, Musa spp, Gliricidia sepium, and Bactris gasipaes were evaluated in two different periods. I. edulis residues with a higher amount of polyphenols, and those of Musa spp, with a higher C/N ratio, showed slow decomposition. The decomposition rates were lower in experiments started in March and higher in August. Inga and banana have high residual values of nutrients at 270 days in the decomposition started in March.
Cold coffee seeds storage with different water content
(Editora UFLA, 2021) Penido, Amanda Carvalho; Reis, Venícius Urbano Vilela; Rezende, Édila Maria de; Rocha, Debora Kelli; Oliveira, João Almir; Rosa, Sttela Dellyzete Veiga Franco da
Coffee seeds are classified as intermediate because they have low tolerance to desiccation and low longevity. Consequently, moisture control and storage conditions are important factors in maintaining the physiological quality of these seeds. Thus, the objective in this work was to evaluate the water content effect on coffee seed longevity. Seeds of five Coffea arabica cultivars from the 2016/2017 crop were used. Part of the harvested seeds was dried in the shade until reach 12% moisture and the other part did not go through drying process, remaining with 40% water content. The seeds were stored in a cold chamber at 10 ºC for a period of nine months, and the physiological quality was evaluated every three months by germination, root protrusion, seedlings with expanded cotyledonary leaves, seedling dry mass and enzymatic analysis of catalase enzymes and superoxide dismutase. Regardless of the cultivar, wet seeds coffee storage provides better maintenance of physiological quality for up to nine months. Seedling vigor is reduced throughout the storage period, regardless of seed water content.
Cold coffee beverages extracted by cold and hot methods: composition and sensory acceptance by youngers
(Editora UFLA, 2021) Violin, João Leonardo; Acre, Lucas Bonfanti; Francisco, Julyene Silva; Mori, André Luiz Buzzo; Benassi, Marta de Toledo
Brazil is the second largest coffee consumer in the world, however, the participation of the young public in this market is not very expressive. The objective of this study was to evaluate the impact of non-sensory (packaging color, information, and images) and brewing methods (hot or cold extraction) on the acceptance of cold coffee beverages by young consumers. A coffee:water ratio of 1:10 (w:v) and infusion during 4 min and 24 h was used for both hot and cold extractions, respectively. Hot extraction was performed at 95 °C, then cooled in a refrigerator and served at 6 to 10 °C, the same temperature that the cold extraction was performed and served. The beverages were characterized by composition and extraction yield. The packaging of the beverages was designed aiming to appeal to the young Brazilian public (15 to 24 years old), and it was used for the Expectation Evaluation. The type of extraction (hot or cold) produced beverages with differences in composition but with similar acceptance. Except for pH (average value of 5.1), the beverages differed in all the studied parameters. Hot-extracted beverages (iced coffees) had higher contents of caffeine, chlorogenic acids, and melanoidins (92.9, 258.2, and 360.8∙10-6 kg 100 mL-1, respectively); they also presented higher acidity (3.4 mL of NaOH 20 mL-1) as well as higher yield compared to the cold-extracted beverages (cold brews). The use on product labels of brown and black colors, coffee bean images, and the inclusion of information regarding the bever ages (extraction method, consumption temperature, non-addition of sugar) generated a positive expectation that was assimilated by the young public. In conclusion, both proposals of cold coffee beverages (by hot or cold extraction) were well accepted considering their sensory and non-sensory aspects.
Alternative treatments diminish oviposition and viability of Leucoptera coffeella (Lepidoptera: Lyonetiidae) eggs and larvae on coffee plants
(Editora UFLA, 2021) Androcioli, Humberto Godoy; Hoshino, Adriano Thibes; Meneghin, Ana Maria; Ventura, Mauricio Ursi; Guide, Bruna Aparecida; Hata, Fernando Teruhiko; Menezes Junior, Ayres de Oliveira
The effects of alternative treatments on the oviposition and viability of Leucoptera coffeella eggs and larvae were evaluated. Under controlled conditions, coffee sprouts cv. IAPAR-59, eight months old, were sprayed with brown propolis extract (1%), pyroligneous extract with pepper and garlic (PEPG) (2%), silicate clay (2%), kaolin (5%), lime sulfur (2%), neem oil (1%) and kaolin + neem oil (5% + 1%), distilled water and no treatment. In a first no-choice bioassay, coffee sprouts were sprayed before oviposition and kept in cages, where adult insects within three days after emergence were released. Adults remained in the cages for 24 hours. Eggs were then counted. 10 eggs per sprout were preserved to verify larval mortality. The number of eggs when treated with propolis extract, neem oil, kaolin + neem oil and PEPG decreased in the evaluations. Treatments with neem oil caused greater larval hindrance. Eggs laid on leaves were also sprayed with the treatments. Egg viability was reduced by treatments containing neem oil and lime sulfur. Neem oil treatments resulted in slim adult emergence; intermediate viability with lime sulfur and slight hindrance with silicate clay. Finally, treatments were also sprayed on leaves, hosting first or third instar larvae. Neem treatment caused high mortality for 1st and 3rd instar larvae, however, this effect was reduced when mixed with kaolin. Nonetheless, these negative effects disappeared when considering the adult survival ratio. Results indicated that propolis extract, PEPG and neem oil treatments are suitable for reducing egg deposition, neem oil considerably diminished larvae survival and adult emergence.
Effect of tropical millipede Rhinocricus botocudus in the degradation and maturity of coffee residues
(Editora UFLA, 2021) Silva, Victor Maurício da; Passos, Renato Ribeiro; Marin, Ericka Broetto; Mendonça, Eduardo de Sá
In Brazil, approximately 3 tons of dry mass per hectare of coffee residues (CR), formed by leaves and branches <5 mm in diameter, were accumulated around the crops in the last harvests of the semi-mechanized crops. Thus, the production of substrates and organic fertilizers from the bioconversion of residues of coffee activity is an important theme in Brazil and in the world. The objective of the study was to investigate the effectiveness of the tropical millipede Rhinocricus botocudus on the degradation and maturity of coffee residues (CR). The presence or absence of R. botocudus were tested in five sampling times (0, 30, 60, 90, and 120 days) with three replicates (n = 3). The analyzed variables were: total C and N contents, lignin, cellulose, soluble C and N, soluble polyphenols, C of humic substances, and infrared analysis of humic acid (HA) and fulvic acid (FA). At the final incubation stage (120 days), the lowest values of cellulose, cellulose/lignin, and polyphenols occurred with R. botocudus. Infrared analysis of HA demonstrated that readily biode gradable structures, such as alcohols and short chain aliphatic molecules, were decomposed over time, consequently reflecting the increase of aromatic structures of greater stability. Compared to the control, these changes in HA were more evident in the presence of R. botocudus. The results of the present study suggest that this millipede species modify the dynamics of degradation and humification of CR by accelerating the maturity of this residue.
Determination of physical and chemical quality of coffee beans under improved potassium fertilization managements
(Editora UFLA, 2021) Moreira, Diulie Talita; Mellis, Estêvão Vicari; Giomo, Gerson Silva; Teixeira, Luiz Antonio Junqueira; Cavalli, Edilson; Ramos, Lucas Ferreira
Coffee quality is the key attribute for establishing its price and commercialization. As the classification of coffee quality is a complex process, mainly based on a subjective judgment, difficult to define and measure, a complementary approach to the current procedures involving physical and chemical methods would bring more effectiveness to the process of quality determination. The chemical composition of the coffee bean is influenced by several factors, among them the nutritional management of coffee trees and, the use of potassium chloride (KCl), which has intensified losses in bean quality due to excessive chlorine in its composition. The aim of this study was to evaluate the efficiency of sources and forms of K application in the quality of beans, and assessment of methodologies for determination of physical and chemical qualities of beans. The experiment was conducted with Yellow Ca tuaí cultivar, from 2017 to 2019, in a randomized experimental block design with five replicates. Six treatments were applied, containing proportions of KCl/K2SO4, as follows: T1-100% KCl; T2-75%/25%; T3-50%/50%; T4-25%/75%; T5-100% of K2SO4 and T6-100% of KCl + two foliar K2SO4 applications. The variables addressed in the study were sensory analysis, screen of beans, electrical conductivity (EC), potassium leaching (KL), titratable total acidity (TTA), and coffee bean color. It was verified that KL, EC, and other chromatic parameters were efficient in detecting alterations on coffee bean caused by the use of KC1. Total (T5) or partial (T4) replacement of KC1 by K2SO4 applied to soil improved chemical characteristics and color of coffee beans. Supplemental foliar fertilization with K2SO4 (T6) was efficient to minimize deleterious effects of KCl on quality of coffee beans, improving beverage quality and grain size, especially in high productive harvests.
Coffee genotypes morphophysiological adaptation under coffee leaf rust biotic stress
(Editora UFLA, 2021) Viana, Mariana Thereza Rodrigues; Azevedo, Harianna Paula Alves de; Pereira, Fernanda Aparecida Castro; Carvalho, Milene Alves de Figueiredo; Guimarães, Rubens José
The identification of morphophysiological traits responsible for a better plant behavior when infected is useful for cultivar selection, and become crucial for breeding. We investigated the morphophysiological behavior of coffee genotypes before and after inoculation with the pathogen Hemileia vastatrix, causal agent of coffee rust. With multivariate techniques we identified the characteristics that most contribute to total genetic divergence of the geno types. Ten genotypes of Coffea arabica from the Germplasm Bank of Coffee from Minas Gerais were sown in a nursery and then take to a greenhouse with controlled temperature and humidity. After one month of acclimatization, the artificial inoculation with the fungus H. vastatrix was carried out. The anatomical and physiological evaluations were performed 1 day before inoculation and 160 days after inoculation. When the first symptom emerged, plants were evaluated according to a descriptive scale for coffee rust. We observed significant differences in rust severity and ostiole opening between genotypes. Different groups were formed by the K-means method, based on morphophysiological characteristics. This shows that genetic variability exists between the coffee genotypes evaluated before and after inoculation with the pathogen. The most important characteristics that contributed to the total genetic divergence were xylem vessel diameter and stomatal conductance. In conclusion, inoculation with H. vastatrix caused a change in coffee geno types based on morphophysiological characteristics.
Development of suitable formula for ready-to-drink healthy mixture of chicory and coffee
(Editora UFLA, 2021) Charoenphun, Narin; Puttha, Ratchanee
Chicory root coffee currently gains popularity as a coffee substitute because of its health benefits. The purpose of this research is to develop ready-todrink healthy mixture of chicory and coffee (RDHCC) products. Fifteen trained panelists were invited to evaluate the aroma intensity 6 ratios of chicory and coffee mixture by sensory rating scales on a straight line at the distance of 150 mm. The ratio of 2:3 of chicory and coffee had the highest rating. The ratio was further used for development of RDHCC recipes consisting of chicory-coffee mixture, coffee creamer and sugar. Nine recipes were evaluated by 9-point hedonic scale with twenty trained panelists, and the best recipe was obtained from the ingredients of 15% chicory-coffee mixture, 32.5% coffee creamer and 52.5% sugar. Other ingredients were investigated to replace coffee creamer, and soybean milk powder had the highest overall liking score (7.45±0.94) and it was not significant different from 8.15±1.09 of coffee creamer. Other sweeteners were included in the recipe to replace sugar, and stevia extract had the highest overall liking score (7.30±1.00), which was not different from 7.45±0.94 of sugar. Herbs were finally incorporated into the RDHCC recipe, and cordyceps (Cordyceps militaris) had the highest overall liking score (7.15 ± 1.04), which was not different from that of the original recipe without herb. The RDHCC products developed by the project are promising for commercialization to serve the demand for coffee with low calorie, low caffeine intake and health benefits.
Manganese and fluorine suppress bacterial blight on coffee seedlings grown in a nutrient solution
(Editora UFLA, 2021) Velloso, Jeanny Alice; Pozza, Edson Ampelio; Pozza, Adelia Aziz Alexandre; Silva, Humberson Rocha; Pérez, Cristian David Plaza; Souza, José Otávio Gusmão de
The use of manganese (Mn) and fluorine (F) in the management of bacterial blight were evaluated in coffee seedlings grown in a nutrient solution. The experiment was carried out with the cultivar Catuaí Vermelho IAC 99. The treatments consisted of the combination of five doses of Mn with five of F, applied via leaf, using Mn sulfate and sodium fluoride, in a 5x5 factorial scheme. The plants were inoculated with bacterial suspension seven days after foliar application of F and Mn doses. The incidence and severity assessments were performed at an interval of 24 hours for 10 days. Photosynthetic activity was assessed using the infrared gas analyzer. Stomatal conductance, photosynthesis, transpiration, PAR radiation and internal CO2 were ana lyzed. The chlorophyll content was calculated indirectly. The leaf analysis was performed by digestion in HNO3 to determine the levels of Mn. Variables such as Area Under Incidence Disease Progress (AUIDP), Area Under Severity Disease Progress (AUSDP), chlorophyll a, b, and total concentrations and photosynthesis were submitted to the Shapiro-Wilk test. The treatment means were subjected to linear regression analysis. Data were analyzed using software R. There was a significant interaction (P <0.05) between the concentrations of Mn and F for the AUIDP and (AUSDP). Doses between 0.7 and 1.4 g L-1 of Mn combined with doses of 0.10 to 0.12 g L-1 of F were more effective in suppressing the bacterial blight, after analysis for both variables. The increase in Mn concentrations in leaves reduced liquid photosynthesis. The interaction between Mn and F suppressed the bacterial blight intensity of the coffee plants in nutrient solution.
Biology and fertility of Hypothenemus hampei (Ferrari, 1867) (Coleoptera: Curculionidae) at 16 °C under laboratory conditions
(Editora UFLA, 2021) Jaramillo, Marisol Giraldo; Machado, Pablo Benavides
The coffee berry borer (CBB) Hypothenemus hampei (Ferrari, 1867) (Coleoptera: Curculionidae) is one of the main insect pests of coffee crops worldwide. The present research determined the biological parameters of CBB at 16 °C under laboratory conditions. Development time (egg to adult) was 119.3±1.02 days, with 41% survival, and 20.37 eggs.female-1 for a period of 120 days. The biological aptitude of CBB is negatively affected to 16 °C, when compared with temperatures between 18–28 °C.
Analysis of arabica coffee productivity due to shading, pruning, and coffee pulp-husk organic fertilizers treatments
(Editora UFLA, 2021) Karim, Abubakar; Hifnalisa, Hifnalisa; Manfarizah, Manfarizah
Arabica coffee productivity can be increased through improved cultivation techniques. This research aims to analyze Arabica coffee production to treat shad ing, pruning, and coffee pulp-husk organic fertilizer application. The research was carried out in two stages, in the first stage a field survey was conducted to determine the relatively uniform land and plant characteristics, while in the second stage was the application of coffee pulp-husk organic fertilizer and pruning of shaded and non-shaded coffee plants by using farmer’s method and the recommended methods by the authors. The application of coffee pulp-husk or ganic fertilizer consists of 0, 2.50, 5.00, and 7.50 kg tree-1, which is equivalent to 0, 4, 8, and 12 tons ha-1 respectively. This research was arranged in a split-plot design, with shades placed in the main plot, while pruning and the application of coffee pulp-husk organic fertilizer in the subplots. The variables observed were the number of redcherries tree-1, greenbean (dry bean) production, and rendement (yield) production at 14% moisture content. Furthermore, the best effect and treatment were determined using variance analysis and the least significant difference (LSD). The result showed that shade only affected rende ment production at 14% moisture content, coffee with shade is better than no shade, pruning affected the number of redcherries and greenbean production. Furthermore, the recommended pruning was better than farmer pruning, while coffee pulp-husk organic fertilizer affected all observed variables. Therefore, the best dose is 7.50 kg tree-1 (12 ton ha-1) because the treatment combination (SxPxF) affected only greenbean production.
Comparision of different application methods to biological control Hypothenemus hampei
(Editora UFLA, 2021) Pereira, Raquel Moraes Costa; Almeida, José Eduardo Marcondes de; Batista Filho, Antonio
There are several studies that deal with the problem of infestation by Hypothenemus hampei in Coffeea arabica. However, the ways of applying products based on entomopathogenic fungi are the same as those used for chemicals. The objective of the research was to comparison different methods of application of Beauveria bassiana against H. hampei. The experiments were developed in laboratory, with blastospores and B. bassiana airborne conidia powders were carried out. Application methods based on immersion, Potter Spray Tower and walking on treated surface. Were three experiments were carried out for each method. Bioassays’design comprised seven treatments (including the control), with five repetitions (each) and 25 beetles per repetition. Suspensions were standardized at 2.4×109, 1×109, 5×108, 1×108, 5×107 and 1×107conidia.mL-1. Conidia powder presented initial concentration of 1.14×1010and it was standardized at 1.14×109; 5.7×109; 1.14×108; 5.7×107; 1.14×107 and 5.7×106 conidia.g-1. A simultaneous test was also carried out based to the three application methods; treatment comprised conidia powder concentration of 1x108 and the control. Data were subjected to analysis of variance, which was followed by Tukey test (P<0.05) and, CL50, in the SPSS 12.1 software. The mortality better rates of H. hampei exposed to B. bassiana IBCB66 were1×108(immersion), 1×109 (Potter Spray Tower) and 1×108(walking), where as mean LC50were 6.1×108, 4.1×108, 2.4×108conidia.mL-1for each method, respectively. The highest mortality rate was recorded in the walking tests on the conidian powder at a concentration of 1×108 conidia.g-1 for the three repetitions of the method and also in the simultaneous test.
Performance of cross laminated timber panels made of Pinus oocarpa and Coffea arabica waste
(Editora UFLA, 2021) Furtini, Ana Carolina Corrêa; Santos, Carolina Aparecida dos; Garcia, Hudson Venâncio Silva; Brito, Flávia Maria Silva; Santos, Thalita Paula dos; Mendes, Lourival Marin; Guimarães Júnior, José Benedito
The growth of the civil construction sector, made necessary to develop alternative products made of sustainable materials. Within this context came the cross laminated timber panels (CLT), which are formed by gluing veneer arranged at 90°, which provide high strength and great versatility, as constructive elements. This research aimed to evaluate the chemical properties of the particles of both materials and evaluate the performance of CLT panels made with Pinus oocarpa and waste wood from Coffea arabica. The panels were made with three orthogonal layers with veneer of pine and coffee wood, using the phenol-formaldehyde (PF) adhesive with a spread rate of 0.35kgm-² and the hydraulic press with a pressure of 1,2×107 N.m-2for 15 min. The physical, mechanical properties, acoustic and thermal performance of the panels were evaluated. There was a significant difference for water absorption in 2 and 24 hours. The panels produced only with coffee wood waste showed the lowest water absorption rates, corresponding to 10.2 and 33.3%, in 2 and 24 hours. In relation to the MOE, the panels made with varied veneer were statistically equivalent to each other and the panels made of pine blades showed a MOE corresponding to 3,33×107 N.m-2. The same trend was observed for MOR, since the average value obtained for pine panels, corresponding to 1,35x108 N.m-2 was significantly higher. Panels made of coffee veneer and pine veneer showed no delamination. With regard to acoustic and thermal evaluation, all panels met the minimum requirements indicated in the standards, with emphasis on coffee wood waste, associated or not with pine wood.
Environmental stratification and performance of Coffea canephora clones grown in the Western Amazon
(Editora UFLA, 2021) Moraes, Marcos Santana; Rocha, Rodrigo Barros; Ferreira, Fábio Medeiros; Souza, Carolina Augusto de; Espindula, Marcelo Curitiba; Teixeira, Alexsandro Lara
Change in the performance of clones grown in different environments is an important question for Coffea canephora breeding. The aim of this study was to evaluate environmental stratification and the performance of C. canephora clones grown in the Western Amazon. For that purpose, the mean yield of three crop seasons was considered to evaluate the performance of 20 genotypes grown in 6 clonal competition trials in the environments of: E1: Ouro Preto do Oeste-RO, E2: Porto Velho-RO, E3: Ariquemes-RO, E4 and E5: Rio Branco-AC and E6: Alta Floresta do Oeste-RO. The trials were conducted with a plant spacing of 3 m × 1.5 m in a complete block experimental design, with three replications of eight plants per plot. Combined analysis indicated significance of the genotype × environment (G×E) interaction and favorable conditions to obtain gains from selection. Reduction in the dimensionality estimated from climate and soil characteristics indicated that the environments of Porto Velho-RO, Rio Branco-AC and Ariquemes-RO are more similar to each other than the environments of Ouro Preto do Oeste-RO and Alta Floresta-RO of greater natural soil fertility and higher altitude. The AMMI1 biplot shows that genotypes 16, 10, and 13 had the highest mean yields, together with greater stability. In the AMMI2 scatterplot (IPCA1×IPCA2), the environ ments E4 and E5 were clustered in the same sector. Clustering based on the complex fraction of the G×E interaction coincided with the AMMI2 scatterplot that clustered the E4 and E5 environments in a single mega-environment. Except for these environments, all the others clustered as locations of different biotic and abiotic stress conditions. This result shows the importance of maintaining evaluations in these environments, which represent the conditions of the coffee fields in the region.
Best time and doses to associate chemical and biological control of the coffee berry borer in highland region, Brazil
(Editora UFLA, 2021) Krohling, Cesar Abel; Fornazier, Maurício José; Mendonça, Pedro Luís Paulino de; Guarçoni, Rogério Carvalho; Martins, David dos Santos; Alixandre, Fabiano Tristão; Dias, Rodrigo da Silva; Rodrigues, Fernanda Latanze Mendes
The coffee berry borer (CBB) Hypothenemus hampei (Ferrari) (Coleoptera: Curculionidae) causes significant damage to yield and quality of coffee beans. Cultural measures are important however, chemical and biological control must be adopted within an integrated CBB management system in order to prevent its damage mainly in larger areas. This study aimed to evaluate different doses and times of spray of the chemical insecticide metaflumizone and its association to the entomopathogenic fungus Beauveria bassiana as a tool to the management of CBB in Arabica coffee. The study was carried out in a high dense crop of Arabica coffee cultivar Catuaí Vermelho at 700 m altitude in the highlands of Espírito Santo state, Brazil. The experimental design used was randomized blocks with eleven treatments, four replications and plots of ten plants. Seven evaluations were carried out by sampling the berries in the upper, middle and two sides of the coffee trees. Metaflumizone at a total dose of 3.5 L ha-1 showed high performance for the control of CBB under field conditions in regions of high altitude. The association of metaflumizone with B. bassiana reduced a mean of 88.5% the infestation level of CBB in the post-harvested coffee beans and it can be used as one of the tools for the Integrated Management of CBB under field conditions. Beauveria bassiana can be associated with metaflumizone to control CBB as a complementary spray in March and at a dose of 2.0 kg ha-1 and should be also used in the Integrated Management of CBB. The monitoring of CBB population must be carried out and the first spraying with chemical or biological insecticide must be started at the recommended control level and in the transit season of CBB when flying adults are exposed.
Modeling effectiveness analysis of momentum and heat transfer in a fixed bed silo-dryer through computational fluid-dynamics
(Editora UFLA, 2021) Mateus, Felipe Leonardo Barcelos; Petri Júnior, Irineu
The drying procedure is of great use in the industry, being capable of increasing the shelf life of many products, in addition to facilitate its transport and storage. The operation is essential for coffee beans to remove their excessive moisture content. The silo-drier has potential to ensure sensorial qualities through the intermittent drying, as well as with optimizations in the energy consumption. The objective of this work was to study the optimization of the numeric representation of a silo-dryer system, comparing the results of three different models available in the software FLUENT® 19.2: Eulerian Multi phase Model for Granular flow with packed bed configuration disabled, the same model but with the packed bed configuration enabled, and the porous zone single-phase modelling. The convergence efficiency of these models was also analyzed through the results of the numeric residue, and the influence of the relaxation factor in the simulation results. The behavior of solid volumetric fraction, air velocity and bed temperature were qualitatively examined with hot air at the inlet. It was found that the momentum relaxation factor influenced the results. Moderately lower factors allowed for faster convergence without significant particle behavior change. Monitoring the mass residue, the enabled packed bed modelling presented lower residuals, while the porous zone modelling presented higher residuals. The packed bed and porous zone modelling reported lower air velocities in comparison to the disabled packed bed modelling, and presented satisfactory heat transfer through the temperature profiles.
Cup of excellence and the evolution of the brazilian specialty coffee market: a historical perspective
(Editora UFLA, 2021) Maciel, Gustavo Nunes; Leme, Paulo Henrique Montagnana Vicente; Guimarães, Elisa Reis; Maciel, Fernanda Nunes
Over its more than 20 years of existence, the Cup of Excellence program has contributed in several ways to the expansion of the Brazilian and global specialty coffee market. Therefore, the aim of this research is to demonstrate, from a historical perspective, the role of the COE in the development of the Brazilian specialty coffee market. To this end, a timeline was drawn up with the main events in the Brazilian specialty coffee market from the late 1980s to the present time. Documentary and bibliographical research was used. In addition, in-depth interviews were conducted. Based on the results, it is evident that the technical legacy left by the COE changed the specialty coffee market not only in Brazil but throughout the world. The results also show that the forms, protocols and rules that regulated the competition’s editions had an impact on the entire market, including production processes and consumption trends.